STMicroelectronics recrute
11 Profils
(Casablanca)
Ingénieur
QUALITE
Missions:
– CQS :
- To ensure the interface
with customers and divisions quality.
- To ensure a quick
feedback within the required cycle time by automotive customers.
- To provide good 8D by
making sure to use the following methods :
– Naze Naze
– Ishikawa
– Fault tree analysis
– Risk assessment
– Defect reproduction
- Make sure to avoid
recurrences.
- Make sure of 8D actions
implementation.
- Lead robust defect
analysis either for not confirmed ECCs or confirmed ones.
- Lead internal improvement
action plans for not confirmed ECCs cases.
- To ensure containment
actions implementation
Profil:
- Engineer diploma
- Experience 2-3 Years in Industry
Quality.
Production
Manager
Misions:
- Define & optimize the needs
in terms of human resources & equipment capacity based on requested
production plan.
- Participate in monthly PDP
elaboration with planning & ensuring respect of priorities &
production launch urgencies.
- Ensure production management
- Keep a close follow-up of direct
material consumption vs BOM standards.
- Monitor & improve other
production KPIs (Productivity, Ind material, Yield, cycle time, direct
labor, …)
Profile:
*****Your
CV in PDF Format is necessary when you apply for this JOB*********
- Engineer Diploma
- Experience in Production
Management 2 – 5 Years.
TEST
Engineer
Missions:
- Participates to analyse
electronic components test data (yield analysis, detractors, …)
- Ensure the problem solving for
test and finish line problems
- Participate to take decisions on
non conform lots.
- Supports quality and division in
case of customer returns or internal/external audits
- Provides status of yield and
test analysis to division
profile:
******Your
CV in PDF Format is necessary when you apply for this JOB*****
- Engineer diploma :
Electronic
- Experience: 2 – 5 years in
Electronic activities
Ingénieur
Lean Manufacturing
Missions
:
- Détecter et contribuer à la
réduction des coûts industriels sur l’axe de l’amélioration continue
(identifier, proposer, animer des groupes de recherche de gains) ;
- Impulser, animer et piloter les
projets d’amélioration en coordination avec les managers et différents
services (Production, Maintenance, Supply Chain, Qualité) et garantir leur
complète réalisation ;
- Utiliser les outils du LEAN en
fonction du besoin et à bon escient tout en tenant compte du process
industriel ;
- Assurer le support
méthodologique et la formation des équipes opérationnelles aux concepts et
outils Lean et 6 Sigmas (VSM, PDCA, standards de travail, Kaizen,
management visuel (8D),…) ;
- Assurer le reporting amélioration
continue.
Profil :
- De formation Ingénieur
GRANDE ECOLE en Génie Industriel ou Mécanique, vous avez une
expérience significative 2 à 5 ANS en LEAN ou Amélioration
continue dans un milieu industriel.
- Vous maîtrisez les principaux
outils du LEAN : VSM, PDCA, 5S, SMED, Standard Work, … ;
- Vous êtes pragmatique, homme ou
femme de terrain et reconnu(e) pour vos qualités organisationnelles et
relationnelles ;
- Vous êtes dynamique et
polyvalent(e), vous faîtes preuve d’une grande autonomie dans l’exercice
de votre fonction et vous avez le sens de l’initiative ;
- Motivé(e) pour rejoindre une
entreprise en pleine expansion, vous avez le goût du challenge pour vous
engager et poursuivre des objectifs ambitieux ;
- Anglais courant impératif.
Ingénieur
Maintenance (Equipements de production)
Missions:
– Assurer
une meilleure disponibilité des équipements de production ;
– Suivre la
performance et l’implication de l’équipe ;
– Mettre en
place les plans de formation nécessaires pour rehausser le niveau de
compétences des techniciens et développer la polyvalence ;
– Gérer la
consommation des spares part /coût de maintenance ;
– Assurer le
suivi journalier des indicateurs de Maintenance ;
– Coordonner
les travaux de la maintenance avec les services annexes ;
Profil:
*****Votre
CV en PDF est necessaire si vous postulez à ce poste**********
- Ingenieur GRANDE ECOLE
- Experience 2 à 5 ans dans la
Maintenance industrielle
Equipment
Engineer
Missions:
Equipment
engineering support in achieving highest possible production standards in order
to maximize cost efficiency and to meet time to market in line with the defined
targets:
- Participates and improves
the global performance of the tools / equipment family (capacity,
reliability, yield, scrap, cost )
- Defines the performance
standards, procedures (Tools specifications), methodologies for the
maintenance and supports the maintenance team.
- New handler buy-off, New
Change Kits evaluation and buyoff, Contactor and socket qualification,
Test handlers inter-company transfer buyoff,
- Provide engineering support for
chronic issue ( initiate solution through improvement projects ), Handler
optimization for productivity & MTBI improvement
profile:
****Your
CV in PDF Format is necessary when you apply for this JOB *****
- Engineer Diploma:
Electromechanic, Electronic
- Technical Baccalaureate:Electromechanic,
Electronic
- Knowledges in AOI equipments is
an advantage
Product
Engineer
Main
missions:
- Implement and debug the testing
programs /JIGs.
- To provide technical support for
new product development or Manufacturing lines, engineering analysis on
production.
- Analyze industrial performances
(production yields).
- Test program optimization.
Profile:
- Engineer from Big schools
(electronic).
- Experience 2 – 4 years in
Electronic activities
- Knowledges on test program
develpoment, debug & hardware.
Ingénieur
Maintenance (Equipements Facilities)
***********Missions***********
Facilities
Maintenance
– Definition
and optimization of maintenance programs.
–
Follow up of all facilities preventive maintenance programs execution
Site
building maintenance and General services
– Conducting
building and grounds maintenance.
–
Ensuring that the building meets the strictest health and safety
requirements.
–
Managing the work of contractors and checking that it is done to the highest
standards
Subcontractors
:
– Build
specifications for maintenance contract selection and follow up with
purchasing support
Business
Continuity Management : BCM
Monitor implementation and improvement with specific BCM Dashboard and / KPI
and fixe specifc reviews.
*********Profile*********
- ( Your CV in PDF Format
is necessary when you apply for this Job ..)
- Engineer diploma
- 2-5 Years Experience in
Maintenance.
Ingénieur
achats
Missions:
Buyer in
charge of Spare Parts and equipments purchases for Bouskoura plant.
- – Build up an optimized
suppliers database to ensure BSK plant competitiveness and best in class
service support on spare parts and equipments following the company
mission of sustainability and business ethics.
- – Ensure regular and
systematic prospection for new vendors and assessment according to
procedures and requirements
- – Develop and reinforce
relationship with the existing suppliers
- – Proceed to annual vendors
evaluation to ensure continuous improvement – Ensure WW benchmarking and
networking with GPO teams
- – Develop partnership with Spare
Parts Segment buyer within ST to allow BSK to benefit to best possible
conditions
- – Deploy automation programs
- – Deploy new procurement 2.0
Tool and new procedure with local end users and procurement team
- – Participate to spare parts
buyer community within NEMA Region
Profile:
*******
YOUR CV in PDF Format is NECESSARY when you apply for this JOB ******
- Engineer diploma
- Experience 2 – 4 years in
purchasing.
Ingénieur
Process
Missions
du poste:
- Support de l’activité de
production avec l’implémentation des process adéquats ;
- Qualification des nouveaux
produits, nouvelles matières, nouveaux équipements ;
- Amélioration de la qualité et du
temps de cycle des produits. ;
- Résolution des problèmes
techniques de process ;
- Préparation de la documentation
technique ( engineering reports, DOE results, technical presentation, … ).
Profil:
- Ingenieur Grandes Ecoles d’ETAT.
- Experience 2 à 3 ans.
( Votre
candidature sans CV en PDF, risque de ne pas être considérée)
Ingénieur
informaticien
Mission
–
Support pour les applications informatiques liées aux
services production et plannings.
– developper
les reports en fonction des besoins.
– deployer
les nouvelles applications informatiques.
Profil
- Ingenieur Grand ecoles d’ETAT (
EMI,ENSIAS ,ENSA,…) Option : Genie informatique, Genie logiciel;
- Ancienneté : 0-2ans
- Connaissances :
Oracle,mysql, sqlserver, unix , html, php
